BG products available from Bar G Enterprises

BG Equipment

BG Inject-A-Flush® Apparatus
Part Number: 908
The BG 908 tool provides a quick, easy method of cleaning fuel injectors. It features an on line regulator which allows you to set the working pressure consistent with the prescribed fuel rail pressure. Tapper valve (PN 908T). Handle tapper (PN 908H). The BG 908 tool is designed to be used with BG Inject-A-Flush® Injector Cleaner (PN 408) and BG 44K® Advanced Formula (PN 208). Together, these products safely and effectively remove hard, baked-on deposits from injector pintles, intake valves and other fuel system components. Oxygen sensor safe. Not harmful to any fuel system components.

BG Carb Frigi-Flush'r Apparatus
Part Number: 911
The BG Frigi-Flush'r Apparatus is designed to mechanically flush the cooling system evaporator, condenser and lines with minimum time and expense. Ideal for removing mineral oil as well as any harmful particulate matter when retrofitting from R-12 to R-134a. Designed to be used with BG Frigi-Flush® II (PN 711). Compatible for use with R-134a, R-12, and R-22 systems.

BG Mechanical Oil Injector Tool
Part Number: 917
The BG Mechanical Oil Injector Tool is the perfect choice for manually adding oil to a charged air conditioning system. This quick and easy tool is designed for use without charging stations or manifold gauge sets. Two ounce capacity.

BG AIS Cleaning Tool Kit
Part Number: 9206
The BG AIS Cleaning Tool Kit is specially designed for use with BG Air Intake System Cleaner (PN 206) to remove sticky, heavy deposits inside the air throttle body and plenum area. It will also clean the back side of the throttle plate. The BG AIS Cleaning Tool Kit must be used with the BG 9210 or 9220 tool to supply the product.

BG 9210 Inject-A-Flush® Apparatus
Part Number: 9210
The BG 9210 tool provides highly effective "on engine" cleaning of the entire fuel system. The BG 9210 is pressurized by shop air. It is designed to be used with BG Fuel Injection System Cleaner (PN 210), BG ISC® Induction System Cleaner (PN 211) and BG 44K® Advanced Formula. (PN 208).

BG EGR Service Tool
Part Number: 9240
The BG EGR Service Tool completes the total decarbonization of the engine fuel system. By removing the EGR valve and installing the proper adaptor plate, the technician can quickly and efficiently flush out accumulated deposits from EGR circuit and exhaust tubes. Deposits dissolved for easy digestion by the engines combustion system. To be used with BG ISC® Induction System Cleaner™ (PN 211).

BG Power Steering Service Center
Part Number: 937
Fluid contamination is the chief cause of premature wear in the power steering system. Oxidation by-products, hose material and metallic debris accumulate in the fluid. As contaminated fluid is pumped through the system under very high pressure, it causes abrasive wear in the pump and the rack assembly. This leads to pump noise, erratic steering (especially when the system is cold) and eventual mechanical failure.

We recommend regular service of your vehicle's power steering system. Using the Power Steering Service Center, a technician will add BG Quick Clean for Power Steering to the power steering system to effectively remove accumulated residues. Then the worn-out, contaminated fluid and suspended debris will be flushed out. Drive belts, hoses and connections will be thoroughly inspected and replaced if necessary. Finally, specially formulated BG Power Clean will be pumped into the system. BG Power Clean contains highly effective ingredients not found in ordinary power steering fluid. Anti-wear agents help prevent wear in the spool valve housing and other components. Special anti-oxidants prevent fluid breakdown and extend the useful life and lubricity of the fluid. Seal conditioners keep seals pliable, thus preventing annoying and often harmful fluid leaks.

BG Drive Line Service Center Patent Pending
Part Number: 938
The BG Drive Line Service Center provides the tool needed to build a complete drive line service for front wheel drive manual transmission cars, all rear wheel drive and all four wheel drives. The BG Drive Line Service Center provides for the first time, a simple means of removing old contaminated fluids and installing new fluids into drive line components from one small, easy-to-use tool.

The BG Drive Line Service Center is small but mighty. It can pump thick cold gear oils and additives or be used to transfer lighter oils such as BG Synchro-Shift® II and ATF.

The Service Center is available as a self contained unit that can operate from almost any place, such as a shop tool cart or bench. With the proper accessories, the unit may be mounted directly to a 16 gallon drum of BG Ultra-Guard gear oil (shown right).

It is also designed to fit the BG Power Steering Service Cart, 936CO (show below).

BG Squid
Part Number: 9404 & 9408
The BG Squid performs a dynamic cleaning service which removes the carbon build-up and sludge that accumulates around the upper ring-belt of the pistons and the combustion chambers. The BG Squid is unique in the industry because it delivers proven BG cleaner all the way to the upper ring-belt area of all the piston chambers at once. Patent number: US 6,557,517, B2

BG Fuel Test Kit
Part Number: 995
The BG Fuel Test Kit is an excellent aid in quick field testing of gasoline and diesel fuels. It provides two basic tests: analyze gasoline for the presence of alcohol and measure the specific gravity of gasoline and diesel fuel. Provides accurate readings and is easy to use. The kit comes with a table showing gravity conversions, weights and heating values of oil used for fuels.

BG Deposit Control Additive Test Kit
Part Number: 995 DCA
Many oil companies claim that their gasoline and gasoline additives contain detergents. Now you can investigate driveability complaints by testing the fuel for additive content.

BG Cross Flow Adaptor
Part Number: CC616
The patented BG Cross Flow Adaptor is a single point hook-up for cross flow radiators. It extracts used coolant from the bottom of the radiator and returns purified coolant to the top and does it all through the radiator fill neck. Quick couplers make for easy connection to the BG PF4HO. No hose cutting and no hose removal required. Works with special radiator adaptor caps that come with the BG PF4HO.

BG CT2 Coolant Transfusion System
Part Number: CT2
The BG CT2 installs a new 50/50 coolant into a vehicle's cooling system while simultaniously removing the old, spent coolant. The CT2 can be refilled and emptied with a flip of a switch–no need to carry heavy buckets of coolant all around the shop. The system is small and compact, taking up the least possible space. It is completely portable and can be used inside or outside the shop. Unlike other systems, the CT2 has the capacity of transfusing the coolant with or without running the engine. Most vehicles can be serviced with the engine off, thus preventing the common problem of continuous intermixing of new and used coolant due to the closing and opening of the thermostat. This process backflushed the vehicle's cooling system, removing scale and debris not accessible when going with the normal direction of coolant flow.

BG PF10
Part Number: PF10
Commercially available No. 2 diesel fuels will oxidize and form residues that deposit in fuel injectors and combustion chambers in diesel engines. These deposits will drastically affect performance of the engine. Clogged fuel injectors create an irregular spray pattern which causes poor combustion of the fuel. This leads to increased fuel consumption, reduced engine performance, engine knock, and increased particulate exhaust emissions.

The BG PF10 Power Flush for Diesel Injection Systems utilizes safe-to-use, highly effective cleaners which will quickly remove hard, baked-on deposits from fuel injectors and combustion chambers of diesel engines.

The results are startling. Engine performance and throttle response are immediately improved. The engine runs smoother and quieter. Exhaust particulate emissions are significantly reduced. Designed for use with BG Diesel Care (Part No. 229) only.

The BG PF10 Power Flush for Diesel Injection Systems is designed for use by a trained technician. To maintain optimum engine efficiency and economy this service should be performed every twenty to thirty thousand miles.

BG PF12
Part Number: PF12
High engine oil temperatures caused by heavy stop and go driving conditions have led to thermal break-down of even the finest engine oil. The result has been more and more deposit build-up in the cooler parts of the engine. Oxidation residues caused by thermal break-down will “fall out” creating engine sludge and deposits in relatively low mileage engines. Modern engines have little tolerance for deposits. Thus, engine efficiency, engine life and engine performance are reduced by deposit formation.

The BG PF12 Power Flush & Prime for Engine Oil Systems presents a perfect solution for correct maintenance of engine oil systems. Used by a trained technician, the BG PF12 injects a safe, effective cleaner into the oil system. The engine is run for 15–30 minutes during the procedure. Sludge and deposits are removed from the cleaning solution as it is pumped through the BG PF12 filtration system. This ensures that there will be no plugging of the engine oil system.

When the cleaning process is completed, the cleaning solution along with any loosened residues are air blown from the engine. A new oil filter, fresh engine oil and BG MOA®—a highly effective deposit control conditioner—are then installed. This can give your vehicle’s engine many more miles of clean, trouble-free operation.

BG Big Dawg® High Capacity Power Flush and Fluid Exchange System
Part Number: PF20
The BG Big Dawg High Capacity Power Flush and Fluid Exchange System is the ultimate solution to effective automatic transmission maintenance. It’s built tough for large vehicle transmissions and handles small vehicles in a snap. The BG Big Dawg cleans all internal transmission components including torque converter, valve body assemblies, lines and cooler vanes. Then it thoroughly flushes the old fluid and cleaner and simultaneously installs new fluid. It can easily handle the exchange of 17 gallons IN LESS THAN TWO MINUTES!

BG PF4
Part Number: PF4HO
Power Flush Cooling Maintenance Service The BG PF4 Power Flush Cooling Maintenance Service flushes the entire cooling system and recycles dirty antifreeze into clean, inhibited automotive spec coolant without draining or handling. The BG PF4 eliminates the need to drain used antifreeze from the vehicle, drastically reducing the high cost of hazardous waste disposal. Utilizing a closed-loop system, the used antifreeze is circulated through a filtration process which removes impurities. After processing, special conditioners in the BG AB Complete (PN 587) (shown below) restore coolant to automotive specifications and adjust pH to the proper level with no guess work. The compact, portable BG PF4 is designed for easy use in automotive service shops, for fleet maintenance, field service and bulk purifying.

BG PF5 Power Flush and Fluid Exchange System
Part Number: PF5
The BG PF5 Power Flush and Fluid Exchange System dissolves and removes harmful deposits from critical transmission components and exchanges the old, oxidized ATF for new fluid of the exact spec required by the car manufacturer in about 5–7 minutes. No other equipment is simpler to operate. Once the connection is made between the BG PF5 and the vehicle, the operator turns the process on. The BG PF5 is fully automatic and requires no further monitoring. There are no adjustments required, no tanks to monitor and the transmission remains full throughout the process. When the exchange is complete the unit simply goes on bypass and sends the incoming new fluid through its normal route back to the transmission. The old fluid is safely captured inside the unit where it will remain until it's time to refill for the next service.

The BG PF5 has no power supply of any kind and no scheduled maintenance is required. It comes complete with all the adaptors needed to hook up to almost any type of vehicle. It can be recharged just before the next service, allowing the unit to be loaded with the exact spec fluid required for each service. Recharging takes only a couple of minutes and can be done from a pressurized ATF source or it can be filled manually quite easily. With a foot print of only 29" x 14" and a fully loaded weight of only 85 pounds, it's the perfect system for a crowded shop.

BG Upper Radiator Hose Adaptor Set
Part Number: PN CC700
The BG Upper Radiator Hose Adaptor Set, for use with the BG PF4HO, is a professional system of processing coolant via the upper radiator hose on vehicles where other hook-ups are difficult or impossible. It fits all sizes of radiator hoses from 2 inches on down and contains all necessary parts to connect to the BG PF4HO.

Back to Top
 
Bar G Enterprises
Distributors of BG Products — top-quality automotive products
Copyright 2006, Bar G Enterprises
All rights reserved
  Web site design and hosting by Qubic